Injinan sarrafa taga da bangon labule

Shekaru 23 na Kwarewar Masana'antu
samarwa

Layin Samar da Fasaha ta Atomatik don Tagar Aluminum da Ƙofa

Layin Samar da Fasaha ta Atomatik don Tagar Aluminum da Ƙofa da aka Fito da Hoton da aka Fito
  • Layin Samar da Fasaha ta Atomatik don Tagar Aluminum da Ƙofa 1
  • Layin Samar da Fasaha ta Atomatik don Tagar Aluminum da Ƙofa 2
  • Layin Samar da Fasaha ta Atomatik don Tagar Aluminum da Ƙofa 3
  • Layin Samar da Fasaha ta Atomatik don Tagar Aluminum da Ƙofa 4
  • Layin Samar da Fasaha ta Atomatik don Tagar Aluminum da Ƙofa 5

Takaitaccen Bayani:

Wannan layin samarwa ta atomatik galibi an haɗa shi da na'urar yankewa, na'urar haƙa da niƙa, hannun robot, teburin matsayi, layin rarrabawa, layin jigilar kaya, allon nuni na dijital da sauransu, yana buƙatar ma'aikata biyu kawai don kammala kusan tsari don tagogi da firam ɗin ƙofa na aluminum, wanda zai iya taimaka muku cimma masana'antar Intelligent don sauƙaƙa aikinku.


Cikakken Bayani game da Samfurin

Alamun Samfura

Gilashin aluminum da ƙofofi na atomatik na CGMA suna yin layin samarwa, injin yin tagogi na aluminum

Layin samar da taga da ƙofa na aluminum na CGMA, yankan, haƙa da niƙa, yin kusurwoyi

Gabatarwar Samfuri

Ga shawarwarin Layin Samarwa mai wayo don saita firam ɗin taga mai kusurwa huɗu na aluminum kowace rana.
Layin samarwa galibi an haɗa shi da sashin yankewa, sashin haƙa da niƙa, hannun robot, teburin matsayi, layin rarrabuwa, layin jigilar kaya, allon nuni na dijital da sauransu, yana buƙatar ma'aikata biyu kawai don kammala kusan tsari don taga da firam ɗin ƙofa na aluminum, saitin ƙasa don bayanin ku ne, sarrafawa daban-daban, tsari daban-daban, CGMA na iya tsara layin samarwa da ya dace bisa ga buƙatunku.

Tsarin tsari

 wani

b

Babban Aikin Layin Samarwa Mai Hankali

1. Na'urar yankewa: Yankewa ta atomatik ±45°,90°, da layin sassaka na laser.
2. Na'urar buga da mannewa ta lakabi: Bugawa ta atomatik, da kuma mannewa ta lakabi a kan bayanan aluminum.
3. Sashen lakabin duba: Duba lakabin ta atomatik da kuma sanya bayanan aluminum zuwa injin da aka nuna.
4. Na'urar haƙa da niƙa: Hannun robot zai iya ɗaukar bayanan aluminum ta atomatik daga injin haƙa da niƙa, wanda zai iya daidaita kayan aikin ta atomatik, musanya kayan aikin da kuma kammala haƙa da niƙa.
5. Na'urar rarraba keken siyayya: Ana ɗaukar lakabin da hannu don sanya samfuran da aka gama a wurin da aka nuna.

Babban Sigogi na Fasaha don Layin Samarwa Mai Hankali

A'a.

Abubuwan da ke ciki

Sigogi

1

 Tushen shigarwa AC380V/50HZ

2

 Matsi na iska mai aiki 0.5~0.8MPa

3

 Kusurwar yankewa ±45°,90°

4

 Tsawon ciyar da yankan 1500~6500mm

5

 Tsawon Yankewa 450~4000mm

6

 Girman sashe na Yankan (W × H) 30 × 25mm ~ 110 × 150mm

7

 Girman gabaɗaya (L × W × H) 50000 × 7000 × 3000mm

Cikakkun Bayanan Samfura

Layin samarwa ta atomatik don taga da ƙofa na aluminum 1
Layin samarwa ta atomatik don taga da ƙofa na aluminum 2

Zane-zanen Layin Samfura Mai Hankali

bankin hoto - 2024-11-12T145743.477

Layin Samar da Tagogi da Ƙofa Mai Hankali ta atomatik daga Shafin Masana'antar Abokin Cinikinmu

Layin samar da taga da ƙofa (feiji)
Layin samar da taga da ƙofa (JMA)
bankin hoto - 2024-11-12T145627.207
  • Na baya:
  • Na gaba:

    • KAYAN DA SUKA YI ALAƘA