Gabatarwar Samfuri
1. Layin samar da robotic na aluminum formwork cikakke ne musamman don kera bangarorin aluminum na yau da kullun.
2. Layin atomatik wanda ya haɗa da lodawa ta atomatik ta robot, yankewa, hudawa, niƙa ramukan CNC, niƙa ƙarshen Rib (zaɓi ne), walda ta robotic ta gefe, walda ta roba mai tauri, miƙewa, buffing saman siminti, sauke robot da stacking, bugu na lambar mashaya ta laser zaɓi ne.
3. Duk layin mota yana da sassauƙa sosai don kera bangarori daban-daban na yau da kullun. Musayar tsakanin bangarori daban-daban abu ne mai sauƙi kuma mai sauri.
4. Don sashin ɗaukar kaya, mai aiki kawai yana buƙatar ɗora kayan aiki a kan mai jigilar kaya ta hanyar forklift, sannan hannun robot ɗin zai ɗauki bayanin martaba ta atomatik kuma ya ɗora shi akan mai jigilar kayan yanki.
5. Sashen yankewa wanda aka sanye da kayan tattara ƙurar guguwa da kuma wurin cire sharar gida.
6. Layin mota yana da sassan huda guda biyu masu tsawon mita 3, kowanne sashe na huda zai iya huda Max. I ramuka a lokaci guda, an yi amfani da na'urar sarrafa CNC don saita tsarin huda, wanda ke da inganci mai yawa da sassauci mai yawa ga kayan aiki daban-daban kuma yana tabbatar da mafi kyawun aiki.
7. Sashen niƙa zai iya niƙa ramukan a ɓangarorin biyu a lokaci guda, kowane gefe yana da kawuna guda uku na CNC masu sarrafawa, masu sassauƙa don buƙatun niƙa ramuka daban-daban.
8. Layin mota yana da hannaye biyu na robot don walda na gefen biyu, mai aiki kawai yana buƙatar ɗora layukan gefe masu yawa a cikin mai riƙewa, mai sarrafawa zai ɗauki layin gefe ta atomatik ya sanya shi a ƙarshen, sannan hannun robot ɗin zai yi walda ta atomatik. Kowane ƙarshen yana da tashoshin walda na gefen layi biyu.
9. Layin mota sanye yake da hannaye guda 6 na robot a cikin rukunoni 3 na tashoshin walda don walda masu tauri, mai aiki kawai yana buƙatar ɗora masu tauri a cikin mai riƙewa, mai sarrafawa zai ɗauki mai tauri ta atomatik ya sanya shi a cikin panel a wurin da ya dace, sannan hannaye biyu na robot za su yi walda ta atomatik.
10. Bayan an yi walda a gefe da kuma tauri, za a juya allon a kuma tura shi zuwa sashin daidaita da kuma sashin buffing, bayan an buffing, za a juya allon don saukewa da kuma tara hannun robot.
11. Tsawon kayan: 6000mm ko 7300mm.
12. Faɗin kayan abu mai albarka: 250 ~ 600mm.
13. Tsawon samfuran da aka gama: 600 ~ 3000mm.
14. An yarda da ƙayyadaddun bayanai na musamman.
Cikakkun Bayanan Samfura
